DELIVERY UPDATE: Due to ice storm conditions, delivery routes will not run on 4/2 in Stevens Point, Wausau, or Minocqua.
We will continue to monitor conditions. All other routes remain scheduled at this time.
loading content
3M 7100010774
3M™ 7100010774 Splice Cold Shrink Connector Insulator, 35.1 mm Dia Min, 16.8 mm Dia Max, 1400 psi Tensile Strength, EPDM Rubber Insulation
3M 7100010774
3M™ 7100010774 Splice Cold Shrink Connector Insulator, 35.1 mm Dia Min, 16.8 mm Dia Max, 1400 psi Tensile Strength, EPDM Rubber InsulationNon-stock product. Available to order - lead time may vary.
Brand3M
MFG #7100010774
Werner Part #3917265
UPC054007344605
Non-stock product. Available to order - lead time may vary.
Brand3M
MFG #7100010774
Werner Part #3917265
UPC054007344605
Product Description
3M™ Cold Shrink Connector Insulator, Splice, Series: 8420, 35.1 mm Diameter Minimum, 16.8 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black
Attributes
Documents
Applications
Features
Specifications
Attributes
Cable EntryWire & Cable
Country of OriginUnited States
Manufacturer3M
Tensile Strength1400 psi
Type / StyleSplice
Documents
Applications
Copper or Aluminum Conductors, Direct Burial and Submersible, Indoor and Outdoor Applications
Features
- Copper conductor with polyolefin foam
- No torches or heat required, good thermal stability
- Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
- Excellent wet electrical properties
- Tough rubber formulation withstands backfilling
- Water-resistant, no mastic or tape required to seal
- Resists acids, alkali and ozone
- Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts
- Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
- Insulation of secondary splices, copper or aluminum conductors
- Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
- Insulation of in-line conductor transition connectors-40 to 194 deg F temperature rating, 1 kV voltage rating
- UniShield®, wire shield, non-shielded, tape shield cable
- 16 in relaxed tube length, 12 in maximum connector length
- 0.67 min Dia cable for seal, 1.38 in Dia insulator cable or connector covers
- 250 to 400 kcmil conductor size
- 1 conductor, 250 kcmil, 400 kcmil, 300 kcmil, 350 kcmil conductor size
Specifications
Standards/Approvals: ARRA Compliant|Buy American Act Compliant|RoHS 2011/65/EU|ANSI C1191.1